Your positionhome > Products&services Low alloy steel flux cored wire

  • Low alloy steel flux cored wire

  • Low alloy steel flux cored wire
     

    FLUX CORED WIRE/FRW-100K3

    Product categories: Products&services Low alloy steel flux cored wire > Products&services > Low alloy steel flux cored wire

           FRW-100K3  ACCORDING WITH GB
     
     

     

    FRW-100K3

     ACCORDING WITH GB/ T 17493 E700T1-K3
    CORRESPONDING WITH AWS A5.29 E100T1-K3
    JIS Z3313 YFL-C602R


    Introduction & Characteristics:
    FRW-100K3 is a rutile and micro-alloyed type flux cored wire designed for all position welding with CO2 shielding gas and 690Mpa grade high tensile strength steel,it contains 2.0% Ni and has good impcat value at low temperature down to -20℃.
    Typical application: low temperature service steels in the construction of LPG and LNG storage tanks etc.

    Instructions:
    1.The oil stains and rust on the weldments should be cleared away.
    2. Designed for welding with 100% CO2.
    3. When welding, the gas flow rate is generally 20~25L/min.

    Chemical compostiton of deposited metal (shield gas:CO2)

    C Mn Si P S Ni Cr Mo V
    0.049 1.43 0.52 0.016 0.017 1.58 0.03 0.38 0.02


    Mechanical properties of deposited metal (shield gas:CO2)

    Yield Strength
    Mpa(σb)
    Tensile Strength
    Mpa(σb)
    Elongation
    %(δ5)
    Impact Value
    -20℃(J)
    735 81 19 77


    Sizes available and recommended currents(DC-EP)

    Diameter(mm) 1.2 1.4 1.6
    Current(A) F 120-300 150-400 180-450
    HF 120-300 150-350 180-400
    V,OH 120-250 150-250 180-250
    H 120-280 150-320 180-350
    VD 200-300 220-300 250-300


    Package

    Dia(mm) 1.2 1.4 1.6
    Spool(kg)/(lbs) 5,12.5,15,20/11,28,33
    Pailpack(kg) 100-300


    Welding positions

    Approvals

     

    Copyright© 2014 Jiangsu fuermu Welding Limited company ALL Rights Reserved