Your positionhome > Products&services Stainless steel flux cored wire

  • Stainless steel flux cored wire

  • Stainless steel flux cored wire
     

    FLUX CORED WIRE/FRW-308L

    Product categories: Products&services Stainless steel flux cored wire > Products&services > Stainless steel flux cored wire

         FRW-308L  ACCORDING WITH GB/ T 178
     
     

    FRW-308L

     ACCORDING WITH GB/ T 17853 E308LT1-1/-4
    CORRESPONDING WITH AWS A5.22 E308LT1-1
    JIS Z3323 YF-308LC


    Introduction & Characteristics:
    FRW-308L is a rutile type flux cored wire for low carbon 18%Cr-8%Ni Stainless steel. It is used for all position welding to be used with CO2 or Argon + CO2 mixed shielding gases.This wire benefits from a fast freezing slag system which assist the operator when welding out of position and performs equally as well when welding in the flat and horizbontal position.

    Instructions:
    1.The oil stains and rust on the weldments should be cleared away.
    2. Designed for welding with CO2 or Argon + CO2 mixed shielding gases
    3. When welding, the gas flow rate is generally 20~25L/min.

    Chemical compostiton of deposited metal (shield gas:CO2)

    C Mn Si P S Ni Cr
    0.030 1.42 0.42 0.027 0.004 9.81 19.83


    Mechanical properties of deposited metal (shield gas:CO2)

    Yield Strength
    Mpa(σb)
    Elongation
    %(δ5)
    Impact Value
    0℃(J)
    570 43 41


    Sizes available and recommended currents(DC-EP)

    Diameter(mm) 0.9 1.2 1.6
    Current(A) F,HF 130-180 180-220 250-290
    V-up OH 100-140 120-160 220-270


    Package

    Dia(mm) 1.2 1.4 1.6
    Spool(kg)/(lbs) 5,12.5,15,20/11,28,33


    Welding positions

    Approvals

     

    Copyright© 2014 Jiangsu fuermu Welding Limited company ALL Rights Reserved