Your positionhome > Products&services Stainless steel flux cored wire

  • Stainless steel flux cored wire

  • Stainless steel flux cored wire
     

    FLUX CORED WIRE/FRW-316L

    Product categories: Products&services Stainless steel flux cored wire > Products&services > Stainless steel flux cored wire

          FLUX CORED WIRE/FRW-316L   FRW-316L 
     
     

     FLUX CORED WIRE/FRW-316L

     


    FRW-316L 

     ACCORDING WITH GB/ T 17853 E316LT1-1/-4
    CORRESPONDING WITH AWS A5.22 E316LT1-1
    JIS Z3323 YF-316LC


    Introduction & Characteristics:
    FRW-316L is a rutile type flux cored wire for low carbon 18%Cr-12%Ni-2%Mo stainelss steel. It is used for all position welding to be used with CO2 or Argon + CO2 mixed shielding gases.This wire recommended for high deposition rates in the flat and horizbontal position.

    Instructions:

    1.The oil stains and rust on the weldments should be cleared away.
    2. Designed for welding with CO2 or Argon + CO2 mixed shielding gases
    3. When welding, the gas flow rate is generally 20~25L/min.

    Chemical compostiton of deposited metal (shield gas:CO2)

    C Mn Si P S Ni Cr Mo
    0.027 1.51 0.40 0.026 0.003 12.75 19.61 2.28


    Mechanical properties of deposited metal (shield gas:CO2)

    Yield Strength
    Mpa(σb)
    Elongation
    %(δ5)
    Impact Value
    -20℃(J)
    580 45 32


    Sizes available and recommended currents(DC-EP)

    Diameter(mm) 0.9 1.2 1.6
    Current(A) F,HF 130-180 180-220 250-290
    V-up OH 100-140 120-160 220-270


    Package

    Dia(mm) 1.2 1.4 1.6
    Spool(kg)/(lbs) 5,12.5,15,20/11,28,33

    Welding positions
     

     

     

    Copyright© 2014 Jiangsu fuermu Welding Limited company ALL Rights Reserved